TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 691 of 968

TM 9-2815-210-34-2-2

FRAME 5

1.

2.

3.

4.

5.

6.

NOTE

Use cylinder head nut wrench with torque wrench to

tighten nuts (1, 8, and 9).

Tighten nuts (1 through 14) to 40 pound-feet in order shown.

Tighten nuts (1 through 14) to 80 pound-feet in order shown.

Tighten nuts (1 through 14) to 110 pound-feet in order shown.

Tighten nuts (1 through 14) to 130 pound-feet in order shown.

NOTE

Do step 5 only if crankcase has “TD” identification.

Refer to frame 3.

Tighten nuts (1 through 14) to 157 pound-feet in order shown.

Do steps 1 through 5 again for other cylinder head.

END OF TASK

5-62