TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 836 of 968

TM 9-2815-210-34-2-2

FRAME 2

NOTE

Plugs or tape put on turbocharger during removal must

be taken off during replacement.

Soldier A 1 .

Slide air inlet hose (1) in place and tighten hose clamps (2).

2. Put turbocharger gasket (3) in place. Put turbocharger (4) in

place and hold until soldier B puts in mounting screws and nuts.

Soldier B

3. Put in two screws (5).

Put on four nuts with lockwashers (6).

4.

Put oil inlet adapter with gasket (7) in place. Put in two screws

with lockwashers (8).

5.

Put oil inlet line (9) in place. Tighten two fitting nuts (10).

GO TO FRAME 3

5-207