TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 828 of 968

TM 9-2815-210-34-2-2

FRAME 6

1.

2.

3.

4.

Place intake elbow hose (1) over air outlet tube on turbocharger (2) as shown.

Place intake elbow (3) over mounting flange of intake manifold (4). Four

studs (5) on mounting flange of intake manifold should fit through holes in

mounting flange of intake elbow as shown.

Put on four nuts and lockwashers (6). Tighten two hose clamps (7).

Tighten two screws (8).

NOTE

Some engines do not have flame heater cover (9).

Put back flame heater cover (9) as shown. Put in four screws and starwashers

(10).

GO TO FRAME 7

5-199