TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 818 of 968
TM 9-2815-210-34-2-2
FRAME 3
1.
2.
3.
4.
5.
6.
Put two fuel return tubes (1) on tee fitting (2).
CAUTION
Do not turn tube tee fittings (3 and 4) more than 45°
or fuel return tubes will break.
Turn tee fitting (3) about 45°.
Put one fuel return tube free end (1) into
tee fitting.
Turn tee fitting back straight.
Turn tee fitting (4) about 45°.
Put other fuel return tube free end (1) into
tee fitting.
Turn tee fitting back straight.
Tighten four fitting nuts (5).
Put flame heater return tube (6) in place.
Screw in and tighten fitting nut
(7) .
Put fuel injector to fuel pump return tube (8) in place. Screw in and tighten
fitting nut (9).
END OF TASK
5-189
Back to Top
