TM 9-2815-210-34-2-2
FRAME 2
1.
2.
3.
4.
Put in elbow (1) as shown.
CAUTION
Do not turn elbow
45° or fuel return
Turn elbow (1) about 45°.
Turn elbow back straight.
(1) or tube tee fittings (3) more than
tubes will break.
Put one end of fuel return tube (2) into elbow.
Turn tee fitting (3) about 45°.
Put other end of fuel return tube (2) into
tee fitting.
Turn tee fitting back straight and tighten two fitting nuts (4).
Do steps 2 and 3 again for fuel return tubes (5, 6, and 7) and tee fittings
(8), (9), (10), and (11).
GO TO FRAME 3
5-188