TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 816 of 968

TM 9-2815-210-34-2-2

5-34. FUEL INJECTOR NOZZLE, HOLDER ASSEMBLY, AND RETURN TUBE.

FRAME 1

1.

2.

3.

4.

GO

Put

Put

Put

NOTE

Adjusting screw type and shim type fuel injector nozzles can be mixed

within the same engine. Plugs put in during removal must be taken out

during replacement.

six gaskets (1) on six injector nozzles (2).

six injector nozzles (2) into six injector nozzle ports (3).

six injector nozzle hold down clamps (4) in place. Put in 12 screws with

lockwashers (5).

Tighten 12 screws to 150

-

to 175 pound-feet.

Put in five tee fittings (6) as shown.

TO FRAME 2

5-187