TM 9-2815-220-24
CYLINDER DEFLECTORS AND SHROUDS REPLACEMENT
0127 00
INSTALLATION (Continued)
1. Install air flow deflectors, straps, access covers, and baffles (continued).
e. Install hook screw (80) through lower loop hole in inter-cylinder deflector (82), upper hole
in inter-cylinder deflector (85) and ultimately through the upper hole in the lower cylinder
deflector straps (81).
f. Install new self-locking nut (78) (item 281, WP 0175) with flat washer (79).
Do not
tighten at this time.
g. Position inter-cylinder head deflector (77) between cylinders.
h. Position hook screw (76) into upper hole in inter-cylinder deflector (82) and ultimately
through the outboard hole in inter-cylinder head deflector (77).
i.
Install new self-locking nut (74) (item 32, WP 0175) with flat washer (75) onto hook screw
(76).
Do not tighten at this time.
j.
Evenly tighten all self-locking nuts ensuring correct positioning of all baffles, straps, and
deflectors installed to this point.
74, 75
84
85
81
78, 79
82
83
80
77
76
INTAKE
EXHAUST
WP 0127 00-16