TM 9-2815-220-24
CYLINDER DEFLECTORS AND SHROUDS REPLACEMENT
0127 00
REMOVAL (Continued)
11. Remove oil filler tube (46).
a. Remove three screws (47) with seal washers (48) and remove lower oil filler tube
assembly (46).
Discard gasket (49) and seal washers (48).
12. Remove flywheel end shroud plate (50).
a. Remove two screws (51) with lock washers (52) and remove flywheel end cylinder head
shroud plate (50).
Discard lock washers.
13. Remove damper end shroud plate (53).
a. Remove two screws (54) with lock washers (55) and remove damper end cylinder head
shroud plate (53).
Discard lock washers.
14. Remove inter-cylinder head shroud plates (56).
a. Remove twenty screws (57) with lock washers (58) and remove inter-cylinder head shroud
plates (56).
Discard lock washers.
15. Remove oil level indicator tube (59).
a. Remove three self-locking nuts (60) and remove oil level indicator tube (59).
Discard self-
locking nuts.
b. Remove and discard gasket (61).
NOTE
Removal instructions for the cylinder head plates, oil filler tube and
oil lever indicator tube on Model AVDS-1790 2DR are similar to
above except that the oil level indicator tube is located between
cylinder numbers 2L and 3L instead of 1L and 2L.
47, 48 (three places)
51, 52
54, 55
53
59
60
(three places)
46
50
57, 58
56
49
61
WP 0127 00-9