TM 9-2815-220-24
THROTTLE/GOVERNOR CONTROL ROD (RIGID) ASSEMBLY REPAIR
0126 00
REPAIR (AS REQUIRED)
NOTE
Either end can be repaired in the same manner, only one end is
described.
1. Remove rod end/bearing (1) from control rod (2).
a. Drill out solid rivet (3) with 1/8-inch drill and portable electric drill (items 10 & 34, WP
0176).
Discard solid rivets.
2. Install new rod end/bearing (1) (NSN:
3120-01-435-2828) and secure to control rod (2) with
3
2
1
1
3
END OF WORK PACKAGE
WP 0126 00-2