TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1111 of 1563

TM 9-2815-220-24

CYLINDER ASSEMBLY REPLACEMENT

0133 00

INSTALLATION (Continued)

7. Position piston (6) in cylinder (1) so that piston pin (10) is just outside of cylinder as shown.

a. Remove one piston pin (10) retaining ring (11).

b. Remove piston pin (10) from piston (6) while piston is still in cylinder.

c. Using suitable lifting device, place piston (6) and cylinder (1) over connecting rod (9).

d. Insert piston pin (10) through connecting rod (9) and piston (6).

e. Secure piston pin (10) with retaining ring (11) assuring that retaining ring at opposite end

of piston pin is in place.

f.

Lower cylinder (1) over piston (6) and onto crankcase studs (5).

g. Temporarily secure with two base nuts (2) positioned approximately 180 degrees apart.

6

1

10

2

9

11

5

WP 0133 00-11