TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1112 of 1563

TM 9-2815-220-24

CYLINDER ASSEMBLY REPLACEMENT

0133 00

INSTALLATION (Continued)

NOTE

When more than one cylinder assembly is installed, each cylinder may

be installed and temporarily secured with two base nuts as described

prior to final torque procedure.

There are three different base nut wrench adapters.

Use the adapter

that gives the best fit for each base nut.

8. Install remaining cylinder base nuts (2).

a. Assure that all cylinder, mounting studs (5) have been lightly coated lubricating oil

(item 21, WP 0173).

b. Install all remaining base nuts (2).

c. Alternately torque-tighten all cylinder base nuts (2) to 70-72 foot-pounds (95-97

N

•

m),

using torque wrench (item 127, WP 0176).

5

3

4

2

END OF WORK PACKAGE

WP 0133 00-12