TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1264 of 1563

TM 9-2815-220-24

DAMPER/OIL FILTER HOUSING ASSEMBLY REPLACE/REPAIR

0151 00

REMOVAL

1. Remove damper/oil filter housing (1).

a. Remove 12 screws (2) with flat

washers (3) securing damper/oil filter

housing (1) to oil pan (4).

b. Remove self-locking nuts (5) with flat washers (6).

Discard self-locking nuts.

1

2

3

4

c. Attach suitable lifting sling and hoist to lifting eyes (7).

WARNING

Damper/oil filter housing is heavy, use suitable lifting device.

Take

care that damper/oil filter housing does not swing on hoist and injure

personnel.

CAUTION

Do not allow damper/oil filter

housing to rest on studs after

housing is separated from

crankcase and oil transfer tubes.

Caution must be taken to prevent

damage to machined surfaces on

the oil pan, crankcase parting line,

and the damper/oil filter housing.

d. With a slight amount of lifting pressure

from hoist, carefully remove the

damper/oil filter housing (1).

7

5 (fourteen places)

6

7

1

WP 0151 00-2