TM 9-2815-220-24
OIL PUMP REPAIR
0154 00
INSPECTION (Continued)
11. Measure outside diameter of shafts (40, 41).
a. Measure outside diameter (A) of reserve impeller shaft (40).
b. Measure outside diameter (B) of driven impeller shaft (41).
c. Replace oil pump if not within specifications in the following table.
Location
Sizes and Fit of New Parts
inches (mm)
Wear Limits
A, B
0.9834 (24.9783)
0.9839 (24.9910)
0.9829 (24.9656)
B
41
A
40
12. Pressure relief springs (3, 4) are mandatory replacement items.
a. New springs (3 or 4) may be tested with a spring tester to specifications in the following
table.
Location
Sizes and Fit of New Parts
inches (mm)
Wear
Limits
3 (Outer)
Approximate free length:
Load at 3.22 inch (81.788):
Maximum solid height:
4.96 inch (125.984)
141.5-156.5 lb (64.241-71.096 kg)
2.90 inch (73.66)
None
4 (Inner)
Approximate free length:
Load at 3.22 inch (81.788):
Maximum solid height:
4.27 inch (108.458)
95-105 lb (43.13-47.67 kg)
2.94 inch (74.676)
None
3
4
WP 0154 00-10