TM 9-2815-220-24
GENERATOR DRIVE MECHANISM REPLACE/REPAIR (300 AMPERE)
0155 00
INSPECTION (Continued)
4. Measure inside diameter (A) of idler spur gear (8).
Replace spur gear if it is not within
specifications in the following table.
5. Replace ball bearing (17).
a. Replace ball bearing to specifications (B, C) in the following table.
6. Measure outside diameter (D) of idler shaft (11). Replace shaft if it is not within specifications
in the following table.
Location
Sizes and Fits
of New Parts
inches (mm)
Wear Limits
A
2.8334 (71.9683)
2.8346 (71.9988)
2.8348 (72.0039)
B
1.1807(29.9897)
1.1811 (29.9999)
None
C
2.8341 (71.9861)
2.8346 (71.9988)
None
D
1.1804 (29.9821)
1.1808 (29.9923)
1.1802(29.9770)
17
B
C
D
8
11
A
WP 0155 00-6