TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1399 of 1563

TM 9-2815-220-24

FUEL INJECTION ADVANCE CONTROL TEST

0162 00

BEFORE TEST (Continued)

CAUTION

In order for the test stand to function properly, the following steps

must be followed.

2. Test stand (1) setup.

a. Assure that master switch (4) oil heater switch (5), jog run (clutch engage) switch (6), and

the motor switch (7) are all in the “OFF” position and that the speed control (8) is at

zero (0).

b. Turn the master switch (4) to the “ON” position.

The power indicator light (9) should be

on.

If the power indicator light does not light, press the reset button (10).

If light does not

come on, investigate and correct the fault before proceeding.

c. Turn oil heater control (11) to a setting of 200 °F (93.33 °C).

4

5

9

7

6

8

10

1

11

1

WP 0162 00-3