TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 208 of 1563

TM 9-2815-220-24

THREADED INSERT REPLACEMENT

0030 00

INSTALLATION

1. Put new lock-ring insert (4) on drive

wrench (12).

2. Install lock-ring insert (4).

a. Coat outside threads of insert (4) with

sealant compound (item 30,

WP 0173).

12

b. Using drive wrench (12), screw

insert (4) into component (8) threads.

3. Position new lock-ring (6) on insert (4).

a. Align serrations of insert (4) with

serrations of lock-ring (6).

4

CAUTION

Do not allow drive tool to contact

component.

Any

impact of pressure

on component surface may

damage

component threads.

Damage to

equipment can occur.

8

4. Install new lock-ring (6).

6

a. Position drive tool (13) in lock-

ring (6) on insert (4).

b. Using hammer, strike top of drive

tool (13) until lock-ring (6) is in

position.

4

5. Inspect new lock-ring (6) for damage.

13

a. If lock-ring (6) is not in position or is

damaged, go to Removal, step 4.

6

6. Clean new lock-ring (6), insert (4), and

related component.

4

7. Go to End of Work Package.

WP 0030 00-4