TM 9-2815-220-24
FUEL/WATER SEPARATOR OPERATION TESTS
0042 00
WP 0042 00-10
AFTER TESTS (Continued)
6.
Install upper and lower sensor probes (14, 15).
a.
Place metal container under manual drain valve (12) outlet, open valves and allow fuel to
empty into container.
When drained, close valve and remove container.
b.
Remove two pipe plugs (17) from sensor probe (14, 15) holes.
c.
Install sensor probe fittings (16).
d.
Install both probes (14, 15) in their proper locations in fuel/water separator (1).
12
Metal Container
15
14
16
17
16
17
1
1