TM 9-2815-220-24
WIRING HARNESS REPLACEMENT, STARTER, SMOKE GENERATOR, AND DUST
DETECTOR WITH LOW VOLTAGE PROTECTION MODULE TOP MOUNTED
(2CA, 2DA) (PART NUMBERS 11655454, 12314619, AND 12354468)
0060 00
REMOVAL
1. Remove starter wiring harness.
a. Remove screw (1) with lock washer (2) and remove starter cable loop clamp (3).
Discard
lock washer.
NOTE
Engine models with 300 ampere electrical systems have only one
starter electrical ground strap (7).
b. Remove nut (4) with lock washer (5) and disconnect two starter ground cables (6), ground
straps (7), and low voltage protection module lead (8).
c. Reinstall nut (4) and lock washer (5) onto starter ground post (9) for safe keeping.
d. Remove screw (10) with two flat washers (11) and remove ground straps (7).
9
10, 11
1, 2
3
4, 5
7
6
8
WP 0060 00-2