TM 9-2815-220-24
WIRING HARNESS REPLACEMENT, STARTER, SMOKE GENERATOR, AND DUST
DETECTOR WITH LOW VOLTAGE PROTECTION MODULE TOP MOUNTED
(2CA, 2DA) (PART NUMBERS 11655454, 12314619, AND 12354468)
0060 00
REMOVAL (Continued)
NOTE
For smoke generation systems with single-solenoid configuration,
harness removal instructions are covered in step 3.
For smoke generation systems with dual-solenoid configuration,
harness removal instructions are covered in step 2.
3. Harness removal with single solenoid smoke generator harness.
a. Remove connector (42) at smoke generator solenoid (43).
b. Remove screw (44) with lock washer (45) securing ground lead (46).
Discard lock washer.
c. Clip and remove tie wraps (47).
d. Remove assembled washer screws (48) and loop clamps (49).
46
44, 45
47
48, 49
43
52
WP 0060 00-9