TM 9-2815-220-24
STARTER/ SMOKE GENERATOR/ DUST
DETECTOR WIRING HARNESS REPLACEMENT,
LVPM CRANKCASE MOUNTED (2CA, 2DA) (PN 11655456, 11682726)
0061 00
REMOVAL (Continued)
12. Remove starter harness upper bracket (28).
a. Remove four screws (54) with lock washers (55) and disconnect starter upper wiring
mounting bracket (28).
Discard lock washers.
NOTE
If the starter upper wiring bracket (28) is unserviceable, low voltage
protection module kit, 12254381, should be installed.
Engineering Release Record (EER) CO-G6682 authorizes this
modification kit to provide a replacement starter upper wiring
bracket and to relocate the low voltage protection module to the
starter upper wiring bracket (28).
54, 55
(four places)
28
WP 0061 00-12