TM 9-2815-220-24
STARTER SOLENOID HARNESS REPLACEMENT (2DR) (PN 11671792)
0062 00
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Inspection, Repair, and Installation
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Mandatory Replacement Parts:
Lock washer (6) (item 90, WP 0175)
Lock washer (6) (item 91, WP 0175)
Lock washer (1) (item 108, WP 0175)
Tie wrap (as needed) (item 81, WP 0175)
Personnel Required:
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Engine removed from vehicle and placed on a
flat stationary surface.
REMOVAL
1. Remove starter wiring harness.
a. Remove four machine screws (1) with nuts (2) and lock washers (3) securing starter
ground cables (4) to engine disconnect bracket (5).
Discard lock washers.
b. Disconnect plug-in harness connections (6).
c. Remove four machine screws (7) with nuts (8) and lock washers (9) securing starter
positive cables (10) to the engine disconnect bracket (5).
Discard lock washers.
1, 2, 3 (four places)
5
10
7, 8, 9 (four places)
6
4
WP 0062 00-1