TM 9-2815-220-24
OIL FILTERS REPLACEMENT
0073 00
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Installation
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Jackscrews (2) (item 71, WP 0176)
Torque wrench, 0-300 inch-pounds (item 124,
WP 0176)
Suitable container (1-gallon (4-liter) minimum)
Mandatory Replacement Parts:
Gasket (item 240, WP 0175)
Oil filter element (2) (item 218, WP 0175)
Seal washer (item 158, WP 0175)
Self-locking nut (10) (item 113, WP 0175)
Expendable Materials:
Cleaning cloth (item 10, WP 0173)
Lubricating oil (item 21, WP 0173)
Personnel Required:
Track Vehicle Repairer (2) 63H10
Equipment Condition:
Engine removed from vehicle and placed on a
flat stationary surface
4
5
1,2,3
REMOVAL
1. Drain oil filter housing and oil coolers.
a. Remove oil vent cap screw (1) with flat
washer (2) and seal washer (3).
Discard
seal washer.
b. Loosen oil drain valve (4) six complete
turns to allow drainage into oil pan.
Do
not loosen oil drain valve adapter (5).
9
8
9
6
2. Remove cover (6).
a. Remove ten self-locking nuts (7) with flat
washers (8) to remove cover (6).
Discard
nuts (7).
7
b. Insert two 3/8-24 jackscrews (9)
(item 71, WP 0176) in threaded puller
holes and tighten alternately to remove
cover (6).
c. Remove jackscrews (9).
WP 0073 00-1