TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 591 of 1563

TM 9-2815-220-24

OIL FILTERS REPLACEMENT

0073 00

INSTALLATION (Continued)

3. Install oil vent cap screw (1).

5

4

1,2,3

a. Apply lubricant (item 21, WP 0173) to

threads of cap screw (1) and install with

flat washer (2) and new seal washer (3)

(item 158, WP 0175).

b. Torque-tighten vent cap screw (1) to

125-150 inch-pounds (14-17 N

•

m) using

torque wrench (item 124, WP 0176).

CAUTION

Failure to properly tighten drain

valve can result in damage to

engine.

Valve must not be over

tightened, nor under tightened.

4. Apply lubricant to threads of drain plug (4) and torque-tighten to 150 inch-pounds

(17 N

•

m) using torque wrench (item 124, WP 0176).

END OF WORK PACKAGE

WP 0073 00-3 (4 blank)