TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 862 of 1563

TM 9-2815-220-24
EXHAUST MANIFOLDS AND ASSOCIATED PARTS REPLACEMENT
0107 00
REMOVAL
NOTE
Early model exhaust manifolds were not clamped outside of the
engine cooling shrouds.
If you have an early model exhaust system,
you should consider upgrading to the new system.
The new exhaust
pipes are made of heavier material, are more reliable, and have a
superior clamping system.
In addition, the parts manual carries only
the newer exhaust manifolds and the new clamping system.
This work package covers removal of the new exhaust system with the
new clamping.
The old exhaust system removal and replacement are
identical with the exception of the clamping.
This work package
details the left side procedure only; the right side is the same.
CAUTION
New clamps (1) will not fit the old exhaust pipes at the center
bracket (2), lower pipe positions, both left and right sides.
1
2
1
Lower pipe cut
away for clarity of
clamping
Right Side
Left Side
Bracket cut away for clarity
of clamping
Ends of exhaust pipes
mirror opposite side
WP 0107 00-2


Back to Top