TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24

  TM-9-2815-220-24 - Page 952 of 1563

TM 9-2815-220-24
FUEL INJECTION PUMP ASSEMBLY REPLACEMENT
0115 00
INSTALLATION (Continued)
CAUTION
When flat sides of coupling sleeves (16 and 17) do not align (with
backlash removed), the coupling sleeves must be separated and the
drive sleeve (17) reset.
Drive sleeve (17) may be pushed back to
disengage from spline, rotated, then pulled forward to re-engage.
16. Fasten coupling halves (16, 17).
a. With backlash removed, timing marks (A) aligned and the flat sides of coupling sleeves
(16 and 17) aligned, tighten four bolts (19) to 23-27 foot-pounds (31-37 N
•
m).
A
17
16
19 (4 places)
WP 0115 00-14


Back to Top