TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 953 of 1563

TM 9-2815-220-24
FUEL INJECTION PUMP ASSEMBLY REPLACEMENT
0115 00
INSTALLATION (Continued)
17. Lubricate assembled coupling sleeves (16, 17).
a. Remove and discard two pipe plugs (38) from sleeve (17).
b. Install adapter (39) (item 15, WP 0177) and lubrication fitting (40) into sleeve (17).
CAUTION
Overfilling of coupling cavity will result in failure of coupling seals.
Use of improper grease will result in premature failure of coupling.
Use only Mobile/Exxon PolyRex EM (PN 98GN42).
c. Lubricate coupling through lubrication fitting (40) with 33 to 35 cc's of grease (item 9, WP
0173).
Discontinue adding lubrication as soon as it shows in the hole on opposite side of
coupling.
d. Remove adapter (39) and lubrication fitting (40) and install two new pipe plugs (38)
(item 7, WP 0175).
38
17
38
17
39
40
WP 0115 00-15


Back to Top