TM-9-2815-220-24
AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TM-9-2815-220-24 - Page 964 of 1563
TM 9-2815-220-24
COUPLING, FUEL INJECTION PUMP, REPLACE/REPAIR
0116 00
INSTALLATION
1. Install a new woodruff key (7) (item 359, WP 0175) on shaft of fuel injection pump (3).
2. Install assembled sleeve (4) on fuel injection pump (3).
3. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of shaft on fuel injection
pump (3).
4. Secure coupling half with new lock washer (2) (item 97, WP 0175) and plain nut (1).
5. Tighten plain nut (1) to 79-87 foot-pounds (107-118 N
•
m).
6. Insure that O-ring (14) is in groove in face of sleeve (4).
Use a light coating of Lubriplate
(item 23, WP 0173) to hold O-ring in position.
14
1
2
4
7
3
WP 0116 00-8
Back to Top
