TM 9-2815-220-24
COUPLING, FUEL INJECTION PUMP, REPLACE/REPAIR
0116 00
INSTALLATION (Continued)
7. Install a new woodruff key (13) (item 359, WP 0175) on accessory drive housing gear shaft
(10).
8. Install assembled sleeve (11), with O-ring and hub as an assembly, on accessory drive housing
gear shaft (10).
9. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of accessory drive housing
gear shaft (10).
10. Secure coupling half with new lock washer (9) (item 97, WP 0175) and plain nut (8).
11. Tighten plain nut (8) to 145-154 foot-pounds (197-209 N
•
m).
13
10
9
8
11
END OF WORK PACKAGE
WP 0116 00-9 (10 blank)