TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 238 of 554

TM 9-2815-224-34&P

Oil System Maintenance Instructions (Cont)

[ 8-4. OIL PUMP REMOVAL/INSTALLATION (CONT).

(8)

(9)

(10)

(11)

Remove two screws (19), lockwashers (20), tube assembly (12), gasket (21), oil pump baffle (22),

and gasket (23) from oil pump (5).

Remove two screws (24),

lockwashers (25),

cover (26), and gasket (27)

from oil pump (5).

Remove screw (28) and washer (29)

from shaft (30).

Remove gear (31) from shaft (30).

b. Installation.

NOTE

Be sure curved surface of washer is

toward head of screw.

(1) Install oil pump drive gear (1) onto

end of shaft (2). Install washer (3)

and screw (4).

(2) Tighten screw (4) to 57 to 61 lb-ft

(77 to 83 N•m).

8-10