TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 230 of 554

TM 9-2815-224-34&P

Oil System Maintenance Instructions (Cont)

8-2. ENGINE BLOCK BREATHER PIPE REMOVAL/INSTALLATION (CONT).

a.

b.

Removal.

(1) Remove two clamps (1) and hose (2).

(2) Remove two clamps (3), hose (4), and elbow (5).

(3) Remove pipe (6) from engine block (7).

Installation.

(1) Install pipe (6) in engine block (7).

(2) Install hose (4), elbow (5), and two clamps (3).

(3) Install hose (2) and two clamps (l).

c. Follow-on Maintenance.

Install rear end plate (para 3-4).

END OF TASK

8-3

OIL PAN REMOVAL/INSTALLATION.

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

Equipment Condition

All

TM or Para

Condition Description

Test Equipment

TM 9-2320-279-10 Engine off.

None

TM 9-2320-279-10 Parking brake on.

TM 9-2320-279-10 Engine side panel removed.

Special Tools

TM 9-2320-279-20 Batteries disconnected.

None

LO 9-2320-279-12 Engine oil drained.

Supplies

TM 9-2320-279-20 Splash guards removed.

Adhesive-sealant, silicone, Item 6, Appendix C

TM 9-2320-279-20 Rear propeller shaft removed

Compound, sealing, lubricating, Item 31,

from No. 2 axle.

Appendix C

Special Environmental Conditions

Compound, sealing, pipe thread, Item 32,

None

Appendix C

General Safety Instructiom

Personnel Required

None

MOS 63W, Wheel vehicle repairer

Level

of Maintenance

References

Direct Support

None

8-2