TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 227 of 554

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

(8) Install two screws (19), lockwashers (20),

and washers (21). Tighten screws to

30 to 35 lb-ft (41 to 47 N•m).

(9) Install screw (22), Iockwasher (23),

and washer (24). Tighten screw to

35 to 40 lb-ft (47 to 54 N•m).

NOTE

Some pulley shafts do not

have grooves for the Woodruff

key. The key is not used on

this type of shaft.

(11)

Install Woodruff key (28)

and vibration damper (29)

on pulley shaft (30).

(10)

Install screw (25), Iockwasher (26), and

washer (27). Tighten screw to 30 to 35 lb-ft (41 to

47 N•m).

Change 1

7-49