TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988
TM-9-2815-224-34-P

  TM-9-2815-224-34-P - Page 311 of 554

TM 9-2815-224-34&P
Fuel Injector Maintenance Instructions (Cont)
(9)
Loosen injector valve nut (9) and turn spray tip (10). Tighten
injector valve nut 75 to 85 lb-ft (102 to 115 N•m) and repeat
steps
(4)
to
(10)
until control rack moves freely.
(10)
If control rack (5) does not move freely, repair fuel injector (1)
(refer to para 11-3).
c. Follow-on Maintenance.
None.
END OF TASK
12-5. INJECTOR CONTROL TUBE REMOVAL/INSTALLATION.
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-20 Valve rocker covers
1/4” drive 12 pt socket 819158 (34104)
removed.
Supplies
Special Environmental Conditions
Tags, identification, Item 61, Appendix C
None
Solvent, dry cleaning, Item 60, Appendix C
General Safety Instructions
Personnel Required
None
MOS 63W, Wheel vehicle repairer
Level of Maintenance
Direct Support
12-29


Back to Top