TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 320 of 554

TM 9-2815-224-34&P

Fuel Injector Maintenance Instructions (Cont)

12-5. INJECTOR CONTROL TUBE REMOVAL/iNSTALLATION (CONT).

e. Installation.

(1) Install right injector control tube (1) with four screws (2). Tighten to 10 lb-ft (13.5 N•m),

(2)

Install left injector control tube (3) with four screws (2). Tighten to 10 lb-ft (13.5 N-m).

NOTE

Make sure injector control tubes move freely in brackets.

(3) Tap injector control tubes (1 and 3) lightly to aline bearings in brackets (4 and 5).

(4) Install right injector control tube clevis (6) to fuel rod (7) with pin (8) and cotter pin (9).

(5) Install left injector control tube clevis ( 10) to fuel rod (11) with pin (8) and cotter pin (9),

12-36