TM 9-2815-224-34&P
Fuel Injector Maintenance Instructions (Cont)
(6)
(7)
(8)
(9)
Pull eight injector control levers (12 through 19).
Tighten eight screws (20 and 21).
Tighten eight locknuts (22 and 23) to 35 lb-in (4 N•m).
NOTE
Step
(9)
applies to right side only.
Some engines are equipped with
throttle delay, others are equipped
with a fuel modulator. Perform
step
(9)
for engines with throttle
delay. Perform step
(10)
for engines
with fuel modulator.
Install U-bolt (24), two lockwashers (25),
and nuts (26) to throttle delay cylinder
lever (27).
Change 2
12-37