TM9-2815-224-34&P
Blower Maintenance Instructions (Cont)
b. Installation.
(1)
Install tachometer drive (1)in tachometer drive housing (2).
(2)
Install gasket (3)on housing (2).
(3)
Install housing (2).
(4)
Install clamp (4)and tighten screw (5).
(5)
Tighten jamnut (6).
c. Follow-on Maintenance.
(1)
Install tachometer sending unit (TM 9-2320-279-20).
(2)
Install engine side panel (TM 9-2320-279-10),
(3)
Close engine cover (TM 9-2320-279-10).
(4)
Start engine (TM 9-2320-279-10).
(5)
Check operation of tachometer.
END OF TASK
14-3