TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 453 of 554

(17)

Apply compound No. 2 to threads of shaft (3).

(18)

Soldier A installs impeller (13), washer (14), and locknut (15).

(19)

(20)

(21)

TM 9-2815-224-34&P

Water Pump Maintenance Instructions (Cont)

Hold 0.015 in. (0.38 mm) feeler gage between impeller (13)

and corner (16) of pump body (5).

While holding feeler gage in position described in step (19),

turn impeller (13) and wall of pump body (5).

If clearance is wrong, repeat section

b. Disassembly

and

section

c. Cleaning/Inspection

of this procedure.

e.

Installtion.

(1)

Install ring seal (1) on water pump (2).

(2)

Install water pump (2) on front cover (3) and into

two hoses (4) and (5).

(3)

Install screw (6) and washer (7). Tighten screw to

20 to 25 lb-ft (27 to 34 N•m).

(4)

Install screw (8), lockwasher (9), and washer (10).

Tighten screw to 20 to 25 lb-ft (27 to 34 N•m).

NOTE

Some engines do not have screw, lockwasher,

and clip. Refer to TM 9-2320-279-24P.

(5)

Install screw (11), lockwasher (12), and clip (13).

Change 2

17-7