TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 446 of 554

TM 9-2815-224-34&P

Aftercooler Maintenance Instructions (Cont)

16-2.

AFTERCOOLER REMOVAL/INSTALLATION (CONT).

(4)

Secure aftercooler (2) with eight lock bolts (6). Do not tighten.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

(5)

Apply silicone adhesive-sealant to flange to elbow (7), hose (8), and connector (9).

NOTE

Some engines have two bolts, lockwashers, and washers. Others have two flanged

head bolts. Refer to TM 9-2320-279-24P

(6)

Install elbow (7) and gasket (10) with two bolts (11), lockwashers (12), and washers (13). Do not

tighten bolts (11).

(7)

Install hose (8) and connector (9) on elbow (7).

(8)

Tighten hose clamps (14).

(9)

Tighten two bolts (11) to 15 lb-ft (20 N•m).

(10)

Tighten eight lock bolts (6) to 15 lb-ft (20 N•m).

C.

Follow-on Maintenance.

(1)

Install blower (para 14-3).

(2)

Start engine and check engine operation (TM 9-2320-279-10)

END OF TASK

16-4

Change 2