TM-9-2815-224-34-P
ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JANUARY 1988
TM-9-2815-224-34-P - Page 61 of 554
(13)
(14)
(15)
(16)
(17)
(18)
TM 9-281 5-224-34&P
Engine Block Maintenance Instructions (Cont)
Install
right s
Tighte
(19 to
Install
Install
Install
fitting
Install
(19)
(20)
plug to 75 to 85-lb-ft (102 to
115 NŽm).
Install reducer bushing (22).
Install fitting (23) and
elbow (24).
Install 1/8-in. oil galley
plug
(25). Tighten plug to
10 to 12 lb-ft (14 to 16 N•m).
Install 3/4-in. oil galley plug (26). Tighten plug to 33 to 37 lb-ft (45 to 50 N•m).
(21)
(22)
(23)
(24)
(25)
(26)
(2?’)
(28)
(29)
Install two l-in. plugs (27) in
left side of engine block (5).
Tighten plugs to 75 to 85 Ib-ft
(102 to 115 N•m).
Install 3/4 x 3/8-in. reducer
bushing (28).
Install ether starting aid
thermostat (29) in reducer
bushing (28).
Install l/4-in. plugs (30).
Tighten plugs to 14 to 16 lb-ft
(19 to 22 N•m).
Install l/8-in. oil plug (31).
Tighten plug to 10 to 12 lb-ft
(14 to 16 N•m).
Install reducer bushing (32)
and elbow (33).
Install drain cock (34).
Install fitting (35), reducer
bushing (36), and elbow (37).
Install starter motor
bracket (38), two
washers (39), two
lockwashers (40), and two
screws (41 ).
3-13
Back to Top
