TM-9-2815-224-34-P
ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JANUARY 1988
TM-9-2815-224-34-P - Page 60 of 554
TM 9-2815-224-34&P
Cylinder Head Maintenance Instructions
3-2. ENGINE BLOCK REPAIR (CONT).
NOTE
Front face of engine block is shown.
(4)
Install 3/4-in. oil galley plug (8) in
front of engine block (5). Tighten
(5)
plug to 33 to 37 lb-ft (45 to 50 N•m).
Install 1/2-in. oil galley plug (9).
Tighten plug to 23 to 27 lb-ft (31 to
37 N•m).
(6)
Install 1/4-in. oil galley plug (10).
Tighten plug to 14 to 16 lb-ft (19 to
22 N•m).
(7)
(8)
Install 3/8-in. drain cock (11).
Install 1/4-in. water jacket plug (12).
Tighten plug to 14 to 16 lb-ft (19 to
22 N•m).
(9)
Install 1-1/4-in. water core plug (13). Tighten plug to 95 to 105 lb-ft (129 to 143 N•m).
NOTE
Some engines have a connector. Others have an elbow. Refer to TM 9-2320-279-24P.
(10)
Install connector (14) or elbow (14.1).
NOTE
Rear face of engine block is shown.
(11)
Install 1/2-in. oil galley plug (15) in rear end of engine block (5). Tighten plug to 23 to 27 lb-ft
(31 to 37 N•m).
(12)
Install 3/4-in. oil galley plug (16). Tighten plug to 33 to 37 lb-ft (45 to 50 N•m).
3-12
Change 2
Back to Top
