TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 120 of 267

TM 9-2815-237-34

2-32. FUEL INJECTION PUMP REPAIR (Cont’d)

16.

17.

18.

19.

20.

Install brace and rod into housing (2).

Apply sealing compound to outside diameter of bushing (1).

Install bushing (1), bushing guide, two washers, and nuts on rod.

Tighten nuts

housing (2).

Repeat steps

until bushing (1) is past flush with bushing boss (3) on housing (2). Remove tools from

12 through 19 for opposite bushing, if required.

2-101