TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 191 of 267

TM 9-2815-237-34

2-39. WATER CROSSOVER REPAIR (Cont’d)

CAUTION

Thermostat must be installed correctly or engine damage may

result.

For general assembly instructions, refer to para. 2-12.

1. Install thermostat (9), gasket (8), and water outlet (7) on water crossover (11) with two washers (4),

capscrew (6), and stud (5). Tighten capscrew (6) and stud (5) t

O 25 lb-ft (34 N•m).

2. Coat threads on heater hose nipple (12), bypass hose nipple (10), and de-airation nipple (2) with

pipe sealing compound and install in water crossover (11).

3. Coat threads on glow plug controller (1) and temperature switch (3) with pipe sealing compound

and install in water crossover (11).

2-147