TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 196 of 267

TM 9-2815-237-34

2-40. FAN DRIVE REPAIR (Cont’d)

1.

2.

3.

4.

5.

6.

7.

8.

NOTE

For general assembly instructions, refer to para. 2-12.

Install O-ring (4) in groove inside cylinder assembly (3).

Install cylinder assembly (3) on housing (5).

Install large O-ring (9) and small O-ring (8) on shaft assembly (13).

Lubricate roller bearing (6) with lithium grease,

Install shaft assembly (13) and spring (7) in housing (5).

Install shaft assembly (13) on cylinder assembly (3) with tabwasher (2) and locknut (1). Tighten

locknut (1) to 96 lb-in. (11 N•m).

Install friction lining (12) in housing (5).

Install three retaining plates (11) on housing (5) with six screws (10). Tighten screws (10) to

22 lb-in. (3 N•m),

2-152