TM-9-2815-237-34
ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JULY 2004
CHANGE 2
TM-9-2815-237-34 - Page 48 of 267
u. Oil Pan
TM 9-2815-237-34
2-15. ENGINE DISASSEMBLY INTO SUBASSEMBLIES (Cont’d)
NOTE
Have drainage container ready to catch oil.
1. Remove oil drainplug (2) and gasket (3) from oil pan (5) and drain oil. Inspect gasket (3) and discard
if damaged.
2. Rotate cylinder block (7) 180°.
3. Remove eighteen capscrews (i) and two studs (4) from oil pan (5) and cylinder block (7).
4. Remove oil pan (5), gasket (8) (if installed), and oil pan rear seal (6) from cylinder block (7). Discard
gasket (8) and seal (6).
2-30
Back to Top
