TM-9-2815-237-34
ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JULY 2004
CHANGE 2
TM-9-2815-237-34 - Page 50 of 267
TM 9-2815-237-34
2-32
Change 1
2 - 1 5 .
ENGINE DISASSEMBLY INTO SUBASSEMBLIES (Cont’d)
w. Fuel Pump
1.
Rotate cylinder block (7) 180°.
WARNING
Gaskets installed on some 6.2L engines assembled prior to 1991 may
contain asbestos.
Gaskets in steps 2 and 3 should be removed with a
scraper or putty knife and then be disposed of IAW current directives.
Inhalation of asbestos fibers can cause respiratory ailments.
2.
Remove two capscrews (1), fuel pump (2), and gasket (3) from cylinder block (7). Discard gasket (3).
3.
Remove two capscrews (8), adapter plate (4), gasket (5), and pushrod (6) from cylinder block (7).
Discard gasket (5).
Back to Top
