TM-9-2815-237-34
ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JULY 2004
CHANGE 2
TM-9-2815-237-34 - Page 59 of 267
TM 9-2815-237-34
2-16. CYLINDER BLOCK REPAIR (Cont’d)
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi
(207 kPa). Use only with effective chip guarding and personal
protective equipment (goggles/shield, gloves, etc.).
d. Blow all dirt and cleaning solution from capscrew holes and oil passages with compressed air.
e. Refer to para. 2-9 for additional cleaning instructions.
f. Coat all cylinder bores, lifter bores, and machined surfaces with OE/HDO.
g. Apply pipe sealing compound to six protective dust caps (3) and all plugs (4) and install in
cylinder block (1).
2-41
Back to Top
