TM-9-2910-226-34

PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

JUNE 1974

TM-9-2910-226-34 - Page 149 of 208

TM 9-2910-226-34

Figure 3-170. Fuel injection pump installed on test stand using panel, part No. 11020519.

(1) Connect the test stand lube pressure-to-fuel

(J) at the compensator inlet tee (H) (on all except

injection pump hose (E) to the fuel injection pump oil

code G pumps).

inlet fitting in the advance unit housing.

(5) Connect the compensator inlet tee-to-

(2) Connect the fuel injection pump lube return-

pressure gage hose (C) to the fuel gage (fig. 3-163

to-test stand lube return hose (F) to the test stand

and 3-169) or to the pressure gage connection of the

lube oil return.

test stand panel (fig. 3-170) (all except code G). On

(3) Connect the test stand fuel pressure-to-

code G pumps, install improvised manifold con-

supply pump inlet hose (A) to the inlet port of the

sisting of elbow (G), tee (H), and adapters (J) and

fuel injection pump fuel supply pump.

(K) into the elbow of the hydraulic head inlet, and

(4) Connect the fuel injection pump fuel supply

connect hoses.

outlet-to-compensator inlet hose (B) to the adapter

3-103