TM-9-2920-225-34

GENERATOR ASSEMBLY; PRESTOLITE AMA-5102UT; LEECE-NEVILLE 3002AC, 3002AD, 3002AE, 5504AA, 5504AB, 2184AC, 5300GP

TECHNICAL MANUAL; MAINTENANCE; DIRECT AND GENERAL SUPPORT LEVEL

FEBRUARY 1981

TM-9-2920-225-34 - Page 121 of 262

TM 9-2920-225-34

1.

2.

3.

4.

5.

Check that housing (1) is not cracked or damaged. If housing is damaged,

generator is nonrepairable.

Measure inside diameter of bearing bore (2). Inside diameter of bearing bore

must be 1.3095 to 1.3105 inches. If bearing bore is not within given limits,

generator is nonrepairable.

—

NOTE

If bearing (3) is not within given limits, get a new

bearing.

Measure inside diameter (4) of bearing (3). Inside diameter must be

go gage to 1.0015 inches no-go gage when held in 1.3120 ring gage.

Measure bearing (3) outside diameter (5). Outside diameter must be

inches nominal when pushed into 1.3120 inches ring gage.

Check that bearing (3) is not damaged. Refer to TM 9-214.

GO TO FRAME 2

1.0005

1.3120

TA 103605

2-105