TM 9-2920-225-34
FRAME 2
I
1.
Take out two screws ( 1), lockwashers (2), and guard washers (3) from
brush holder (4).
2.
Put two brushes (5) into brush holder (4) and put in two
lockwashers (2), and screws ( 1).
NOTE
Follow-on Maintenance Action Required:
guard washers ( 3),
1.
Replace fan and hub assembly. Refer to para 2-7.
2.
Replace drive end housing. Refer to para 2-8.
END OF TASK
NOTE : PARTS WITHOUT CALLOUTS ARE SHOWN
ONLY FOR REFERENCE PURPOSES.
TA103560
2-59