TM-9-2920-258-30-P
ALTERNATOR, 180 AMPERES, MODEL 5520AB
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL
APRIL 1989
TM-9-2920-258-30-P - Page 29 of 76
TM 9-2920-258-30&P
Insert terminal cover (40) and pull jumper connector (39) into place against S.R. end
housing (1). Secure in place with two screws (36), two Iockwashers (37), two screws
(38) and two Iockwashers (37).
Align jumper connector (39) and connector assembly (41). Secure in place with four
Iockwashers (35) and four screws (34).
NOTE
Install brush lead away from brush spring.
6
Insert four brushes (8) partially into brush rigging assembly (31). Install tabbed
Iockwasher (29), two brush leads (8), terminal lead (28), Iockwasher (27) and nut (26)
onto existing stud of brush rigging assembly (31). Close tabbed Iockwasher over nut.
Repeat for opposite side.
7
Place bearing retainer (25) onto end of S.R. end housing (1). Secure in place with
three screws (24).
3-17
4
5
Back to Top
