TM-9-2920-258-30-P
ALTERNATOR, 180 AMPERES, MODEL 5520AB
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL
APRIL 1989
TM-9-2920-258-30-P - Page 19 of 76
TM 9-2920-258-30&P
14 Remove four screws (30). From inside stator assembly (2), remove brush rigging
assembly (31) and bearing retainer (32). Using a Bearing Puller with Slide Hammer,
remove bearing (33).
15 Remove four screws (34) and four Iockwashers (35) from connector assembly (41).
16
17
18
19
Remove two screws (36), two Iockwashers (37), two screws (38) and two Iockwashers
(37) from jumper connector (39).
Remove terminal cover (40).
Remove seven screws (42) and seven Iockwashers (43) from S.R. end housing (1).
Separate the S.R. end housing (1) from stator assembly (2).
Pull jumper connector (39) back away from stator assembly (2) exposing all wires.
3-7
Back to Top
